Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Water Filter

De-water,Desulfurization,Controller,Increase pressure - details see: https://www.machineto.com/biogas-scrubber-biogas-pretreament-system-biogas-purification-system-10230043

Biogas Scrubber/Biogas Pretreament system/Biogas Purification system

1. Application field

The skid-mounted biogas pre-treatment system adopts the dry desulfurization system which is applicable for small industrial devices whose H2S is less than 2000ppm. The biggest skid-mounted pre-treatment system can deal with 300Nm3/h biogas and we suggest it to be used in farmland which can equipped with CHP system. In the industrial waste water biogas project, if the devices has to run long time in a day, the H2S is high and has to synchronize with the nation grid, the biogas dry desulfurization system has to be designed specifically.

The application domains equipped with small biogas generator set:

Pig farm with more than 3000 pigs

Cow farm with more than 500 cows Biogas Scrubber/Biogas Pretreament system/ Biogas Purification system

Chicken farm with more than 10000 chicken

Biogas collected from more than 200 peasant households can be used to generate electricity.

2. Application Environment

The working area ambient temperature should be in the range of 0 ~ 50 C due to the drained water from the pre-treatment. If there is any underground sewage wells, the system has to anti-freezing and anti-cracking. This system is better to be installed in a well-ventilated room.

Model	KDCL-50-WQ	KDCL-100-WQ	KDCL-200-WQ	KDCL-300-WQ
Gen-set Power (KW)	24-50	80-120	150-200	250-300
Gas Flow (Nm3/h)	30-50	50-100	100-150	150-200
Pressure (Kpa)	10	10	10	10
Desulfurizer Model & Size	2 pcs KDTL-250-G	2 pcs KDTL-400-G	2 pcs KDTL-800-G	4 pcs KDTL-800-G
	φ500×1880	Φ600×2000	Φ800×2200	Φ800×2200
Water separator Model	KDFC-200-G	KDFC-400-G	KDFC-400-G	KDFC-400-G
Gas Blower Model&Power	NSR50-50A 1.1KW	NSR65-65A 1.5KW	NSR80-80A 2.2KW	NSR100-100A 3KW
Inlet&Outlet Flange	DN50 PN10	DN65 PN10	DN80 PN10	DN100 PN10
Ferric Oxide Q.TY	2*150kg	2*300kg	2*500kg	4*800kg
Replacement (Hours)	1500	1500	1250-1500	3000-4000
Dimension (mm)	2000×1600×2160	2000×2000×2160	2500×2000×2250	4200×2000×2280