Home  >  Packaging Machinery  >  Laminating Machines

1) FEEDER SYSTEM+2) DUST REMOVAL SYSTEM, 3) COATING SYSTEM +4) INFRARED RAY SYSTEM, 5) LAMIANTING SYSTEM +6) TWIN DISC-KNIFE - details see: https://www.machineto.com/automatic-water-based-window-type-lamination-machine-10059255

This a machine designed specially for the P.P film lamination of thick paper. It’s can be used for fully lamination and when its system switch to window-type of thick paper, pumping the glue and apply on the surface of the sheet and transported sheet through conveyor to IR curing system for dry process. Heat up the upper roller by water temperature controller and press roller to pressurize each sheet for the laminating performance. Then through the cutting system its unique twin-disc knife to cut a gap then tear it up from the gap and forward to stacker automatically.

1. Latest type of feeder adopt vacuum pump for paper suction and feeder. The feeder is stable and less noise. With the stream-type structure to be able work with non-stop condition.It will not have wastage of P.P film as well save the time and manpower.
2. The special design of align structure meets for vary of sheet size and thickness. The sheet can be aligned with vertical position and enable the laminating quality done delicately, easily, accurately.
3. The coating system adopts unilateral adjusting control, which enable glue coating evenly and using motor control coating automatically and separate roller from sheet for the convenience of operation.
4. The new type of curing system adopts newest heat wind design and the structure won’t lose the temperature. Its enable P.P film reach to the rapid drying in the short time.
5. The feeder, gripper paper receiving and stacker are running with coherent operation system. stacker system adopt with vacuum circuit to cooperate to mechanism perform to reducing noise and stability. Paper size can be exchanged easily and sampling randomly.
6. Auto cutting system its twin-disc knife rotating and pulling roller can be separate and tear up the laminated sheet. By wear-resisting belt transport the sheet so as to highlight the need of stacker.
7. The setting of overlap and transport adopt without distance limitation. The sheet able todecide the time of feeder and reduce sheet wastage.This machine adopt electronic circuit, its speed can control easily, less noise, low failure.It’s a sophisticated creation.

   Model	YLL-3W	YLL-3W
   Specification	1020 X 900mm	1200 X 900mm
   Max paper size	1020 X 900mm	1200 X 900mm
   Min paper size	300 X 400mm	300 X 400mm
   Laminating speed	10-60m/min	10-60m/min
   Laminating pressure	100-150 kg/cm2	100-150 kg/cm2
   Laminating temperature	500-100°C	500-100°C
   Electric heater	113.8 KW	113.8 KW
   Power requuired	43 HP	43 HP
   Machine Dimension	11503 X 2235 X 2800mm	15503 X 2415 X 2800mm
   Net Weight (approx)	11400 kg	12000 kg