Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Machine Oil Filter

ZLY series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil etc. - details see: https://www.machineto.com/automatic-vacuum-lubricants-oil-filtration-10227888

OIL DESCRIPTION:

The basic function of gas engine oil includes the reduction of frication,lustration,cooling,pressurizing and anti-corrosion.

Excellent oxidation stability, alleviating the probability of lacquer film and accumulated carbon.

Fine lustration separating property.

Good performance of viscidity of high temperature, and high viscosity index.

Good performance of anti-corrosion,anti-frication and anti-foam.

Fine performance of low temperature resistance.

Gas engine oil is easy to be aging and degenerating either due to the in leakage of water,coolant,fuel,

smoking ash, carbon matter, or the absorption of dust and metal scraps and the dissoluble and infusible oxidation of itself. Using this sort of oil may make piston ring felt, oil way jam, corrosion and sedimentation increase and the abrasion process aggravate. Therefore, gas engine oil must be treated in time to restore the performance of oil product, cut down the expense on oil purchasing and save oil resources.

PRODUCT DESCRIPTION:

ZLY series oil regeneration system mainly treats and regenerates used engine oil and waster motor oil

from car, motor, truck, ship, mines, electrical power and so on.

It not only removes the impurities, water, and acid matter, organic and inorganic acid effectively, but also can remove carbon particulate matter and peroxides. In gas/diesel engine oil, bitumen and colloid and other sludge can be removed similarly.

After treatment by the machines, the color of the treated oil is recovered and the quality indexes are

improved too so as to resume the performance of gas/diesel engine oil, to keep the engine in good

lubricating conditions, to guarantee lubricating system of gas/diesel engine to work properly and to

prolong the service life of gas engine and oil, finally, to economize expense on oil purchasing and save oil resource.

APPLICATION:

Xinsilu ZLY series Waste Oil Recycling machine is particularly suitable to regenerate used

internal-combustion engine oil including diesel engine oil, gasoline engine oil and used hydraulic oil, other used machinery lubrication oil and used cooking oil. ZLY series are able to effectively remove colloid, oxide, acid, pitch, particles, impurities, water, gas in the used oil. Specially, ZLY can restore the color of used oil and remove the scent rapidly.

FEATURES:

1.Adopting high-precision stainless steel strainer with excellent mechanical intensity and long service life, which is corrosion-resistant and high-temperature-resistant, it can intensively remove particulate matter from waste oil.

2.Completely removing water and harmful gas from the waste oil.

3.Recovering the color of the treated oil as fresh oil

4.Simple operation, safe and reliable.

5.As for the mixed gas which is pumped by vacuum pump, through some methods such as exhaust

treatment, rundle cooling, condensation, purification, filtration to reinforce the efficient output power of the machine, prolong the service life of vacuum pump largely. It not only protects the vacuum pump, but also makes the discharge gas clean and accord with environmental requirements.

6.This system adopts advanced indefinite oil temperature control device, which can set the top and

bottom oil temperature discretionarily to avoid frequent motions of beating AC contract and prolong the

service life of AC contract.

7.This plant is equipped with integrated protection devices. Through each executive component, it can

realize overall self-protection to the temperature, pressure, vacuum level, ultra-pressure etc.

WORKING PRINCIPLE:

1.The waste oil enter into the Pre-filter to remove the big impurities, the precision of the filter can reach

to 50 micron, then the oil flow into the reactor and heat it;

2.when the oil temperature up to 120-140°C,start the motor and add some additive(Activity

White Clay and Water Glass), then mix with the waste oil(there is a blender in there actor) to change

the color of oil.

3.the gas and the water w ill be exhaust by the exhaust fan and condenser;

4.Finally, the oil which mixed with the chemical will flow into the filter tank. there are many strainers in

the filter tank, and the gap were be designed between two strainers.

5.After treating, the clean oil enter into the filter and flow into the outlet pipe(the oil color can reach up to

No.2 and the precision is less than 5-10 micron). At the same time , the residues and the chemicals

(no any acid) were saved in the gap, which can be took out after finishing treat the oil.

You can burn or bury these residues directly, without any poison. or you also can take them as fuel or bitumen to pave the road.

MAIN STRUCTURE:

1.Reaction system (reactor, blender, oil pump);

2.Heating system (heater, circulation oil pump, heat exchanger);

3.Filtering system (filtering equipment body, strainer sheet, moving-start equipment lock-down

equipment);

4.Exhaust gas processing system (gas exhausting machine, radiator, cooler, water container, exhaust

gas processor, exhaust gas filtration);

5.Electrical control system;

TECHNICAL DATA: