Automatic Termal BOPP Film Lamination Machine

RYFM-520 Termal Film Lamination Machine

Introduction

RYFM-520 series Lamination Machine with BOPP film as material, after laminating, the product has high transparence and good third

dimension, and the products are innoxious, inodorous, no pollution, the conglutination is good with no bubble. The Main motor use imported transducer, the capacity is stable. The Laminated machine has following functions: Automatically stop when there is no paper, cutting film, fast roll the finished products and output system, automatically holing and so on. It is high speed and power save.

1, Feeder
2, Auto laminating system
3, PLCsystem
4, Inventer system

5, Save power

Technological Parameters

1. Adopting automatic feeder, so that the feeding, laminating, separating can totally inline

for laminating job.

2. The overlap use servo –motor control, when operating the machine just need to set the

paper length on touch screen, the machine can run automatically, the overlap tolerance

is about ±2mm.

3. The heating roller is use heat transfer oil, the temperature meter is inside the oil, not

touch with the roller surface, so that get the accurate temperature.

4. Adopt the jogger for collecting the paper, after pneumatic separating paper can collect

well with the vibrating table, no need extra people for collection.

5. Use pneumatic pressure, and can get bigger pressure, and easier for usual maintained.

6. The main electrical products use import and Taiwan produce, to make sure the stable for

running the machine.

7. Use the anti-curve for thin paper, make sure the thin paper after laminating is not decline

and diffcult for paper collection.

8. The film loading is using the air shaft, easy loading, the film feeding use pneumatic brake

blocked, have very stable tension.

PACKAGE WOODEN BOX SIZE : 2550*1850*1800MM=8.5CBM