Home  >  Packaging Machinery  >  Labeling Machines

1gluing machine, 2automatic gluing machine, 3bottle gluing machine, 4servomotor glue labeling, 5CE automatic gluing machine - details see: https://www.machineto.com/automatic-round-bottle-wet-glue-labeling-machine-10058332

automatic glue labeling machine automatic round bottle glue labeling machine round bottle labeling machine round bottle glue labeling machine automatic round bottle hot melt glue labeling machine round bottle hot melt glue labeling machine automatic hot melt glue labeling machine bottle gluing machine automatic gluing machine gluing machine Automatic round bottle wet glue labeling machine labeling machine

Functions:

(1)The machine adopts imported PLC control system,or touch switch knob control,elected Japanese Omron photoelectric device,variable speed motors,conveyor chain board and imported belt related parts.

(2)Host design absorbed import machines'labeler transmits way,solving the general domestic labeling unstable factors.

(3)The machine is suitable for different bottles,easy adjustment,can be finished in a short time.

(4)The quick printer adopts the motor drive,gas drive.The words in the ribbon are clear and clean.

(5)The whole machine is designed to meet GMP standard.

(6)This machine is suitable for processing the big round label of medicine,chemical,food,commodity etc.

Operating principle:

By road line bottle to chain plate,the bottle after adjustment from the device into isometric arranged into photoelectric sensor area,by stepping motor control reel label paper get signal automatically send label,the correct will automatic peeling off label on the bottle paper tack.Another group of photoelectric sensor timely the restrictions of a standard paper is sent out.In the continuous bottle feeding process bid-winning paper by zhang right stick on the bottle,after roller planish,automatically output,complete the whole labeling process flow.

Operation procedure:

(1)As shown on the correct installation tags,adjust the height of each place.

(2)Check the label position is correct.

(3)Adjust elam bottle rool and volume label plate position.

(4)Open power supply,open photoelectric switch,the printer should preheating fifteen minutes.

(5)Open motor and send non-standard switch,try to labeling machine,if there are any complicationns,please exclude.

(6)Labeling height adjusting.

(7)Confirm touble-free hind can safe production.

(8)Power off.