automatic line jack communication toroidal coil winder(SS900B2 series final OD 5~16mm) replace JOVIL toroidal winder

SS900B2 series Toroidal coil winding machine for wind very small toroidal coil,toroid inductor, toroidal transformer, etc. - details see: https://www.machineto.com/automatic-line-jack-communication-toroidal-coil-winder-ss900b2-series-final-od-5-16mm-replace-jovil-toroidal-winder-10359164

Condition:New	Place of Origin:Fujian China (Mainland)	Brand Name:SanShine	Model Number:SS900B2
Voltage:AC220V or 110V	Power(W):450W	Weight:gross weight 60Kgs	Dimension(LWH):packing size L94W49H70cm
Certification:Inner	how to make toroid EMC chip filter:use SANSHINE's SS900B2 series toroid coil winding machine to wind	how to make toroid EMC SMD filter:use SANSHINE's SS900B2 series toroid coil winding machine to wind	how to make toroid EMC SMT filter:use SANSHINE's SS900B2 series toroid coil winding machine to wind
how to make toroid coil of line jack:use SANSHINE's SS900B2 toroid coil winding machine to make	how to make toroid SMD-coil and SMT-coil:use SANSHINE's SS900B2 series toroid coil winding machine to make	how to make the very small toroidal coil:use SANSHINE's SS900B2 series toroid coil winder to wind	how to make small toroid filter:use SANSHINE's SS900B2 series toroid coil winder to wind
how to make small toroid transformer:use SANSHINE's SS900B2 series toroid coil winding machine to make	make toroid EMI SMD filter:use SANSHINE's SS900B2 series toroid coil winding machine to make	how to make power toroid filter:use SANSHINE's SS900B2 series toroid coil winding machine to make

automatic line jack communication toroidal coil winder(SS900B2 series final OD 5~16mm) replace JOVIL toroidal winder

contact supplier for automatic line jack communication toroidal coil winder(SS900B2 series final OD 5~16mm) replace JOVIL toroidal winder

Descriptionof SS900B3 automatic toroid coil winding machine:

The SS900B3 digital automatic toroid winding machine adopts CNC toroid controller, it is belt type winding shuttle.

belt type is used for the thick copper wire winding. It's an accurately and reliability digital toroid-winding machine.

is used for so small toroidal inductor, toroidal transformer, toroidal current transformer, toroidal current sensor, toroidal coil,

toroid chock coil, power inductors, power magnetics, UPS inductor, converter inductors, watter metter sensors,

toroid current transformer of electronic watter-hour meter, power factor corrector toroid coil, etc.

Featuresof SS900B3 automatic toroid coil winding machine:

1. Collocate belt type winding head, and the interchangeable roller table with different size shuttle(winding magazine) for different dimensions coils and different wires, so that to reduce the cost.

2. Hi-tech shuttle for highest efficiency.

3. Separate speed controls for wire loading and winding.

4. Accurately count length of loading wire by length sensor, the wire length sensor be integrated in the winding motor.

5. Accurately count turns of winding by high frequency response photo-electricity sensor.

6. Programmable winding direction, winding returns range (turns or angle) and segment winding angle.

7. Accurately wire spacing by programmable controller.

8. Memory capacity accommodates 999 sequences of parameters with off-power memory retention.

Specificationof SS900B3 automatic toroid coil winding machine:

Copper wire diameter: 0.07~0.25mm

Min. Finished ID: 2.5mm (will be different by shuttle size and coil height. )

Finished OD range: 5~16mm

Max. Speed: 1200rpm

Winding motor: 1/2HP DC brushless motor

Spread motor: Stepping motor

Memory capacity: 999 steps

Power source: AC220V /110V +10%, 50/60 Hz

Dimension: L60x36x60(cm)

Net weight: 39Kgs

Model	Universally matched shuttle model	Copper wire diameter range(mm)	Min. inside diameter of finished coil (mm)	Out side diameter of finished coil range (mm)	Height of finished coil range (mm)
SS900B2	1.6 1.8 2.0	0.07 ~0.25	2.5	5 ~ 16	3 ~8
SS900B3	1.8 2.0 2.5	0.07 ~0.25	2.5	5 ~16	3 ~8
SS900B4	2.5 2.8 3.0 3.5 or customized	0.15 ~0.8	3	5 ~60	3 ~25
SS900S4	2.6 3.0 3.5 or customized	0.05 ~0.3	4.5	5 ~60	3 ~25
SS900B6	3.5 5.0 6.3 or customized	0.3 ~1.2	6	10 ~80	5 ~45
SS900S6	3.5 5.0 6.3 or customized	0.08 ~0.35	7	10 ~80	5 ~45
SS900B8	8 10 12 15 or customized	0.35 ~1.5	12	20 ~150	8 ~80
SS900S8	8 10 12 15 or customized	0.3 ~0.6	15	20 ~150	8 ~80