Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Crusher

hammer crusher for coal, High efficiency, long life, operation, maintenance and cleaning are very convenient, stable performance - details see: https://www.machineto.com/apex-ylf389-70a-hammer-crusher-for-coal-10310769

Hebi City Thermal Meter Instrument Factory, is a research, production, trade in one of the emerging technology-based enterprises. Company has a strong economic foundation, a strong network of relationships, a comprehensive technical and staffing, a large number of highly qualified professionals distributed in the research, production, marketing and other important positions. The adoption of advanced management mode, in accordance with the ISO9001: 2008 international quality system standards implementation of total quality management. We have a very wide range of commodity information network, partners throughout the country, we are in the "create the best service" business philosophy under the guidance through the unremitting efforts of all staff, has made remarkable achievements. My company has a proficient, operational ability of the backbone of the team, providing professional, personalized, all-weather, all-round service.

the principle of APEX-YLF389-70A hammer crusher for coal:

The system uses a crusher impact crusher principle, when the material into the crusher, by the centrifugal force of the impact rotor hammer to get a certain kinetic energy, materials and cavity wall collide with each other, broken through the screen into the shrink subsystems.

Reduction subsystem composed by two two splitters, shrink splitter for horizontal reciprocating motion that is cutting materials. Part of the cutting of materials received, some discarded. So continuously, reaching different parts of the material regularly take certain point, so that the preparation of the sample can represent all of the material into the machine.

the structural characteristics of APEX-YLF389-70A hammer crusher for coal:

　　　1, broken reduced extension by the feed hopper, crushing device, reduction of sub-unit reduction of deceleration devices, motors, electrical control system, according to sample bucket, frame and other components.

　　　2, feed device and a feeding device is fully sealed structure, crusher before the start of the material added to the hopper, the stamped seal, then insert the body injector, thus constituting a sealed system.

　　　3, both ends of the pulley shaft and the flywheel, the center line of the rotor body with symmetrically arranged, when the hammer side of the wear exceeds the limit, the horizontal rotary shaft can be 180 °, the pulley and flywheel are reversed, the rotor can continue to use prolong its working life.

　　　4, the upper and lower case closed, opened using a hinge joint, locking device with spring handle, tighten the chuck under the cabinet, safe, reliable, easy to operate and simple.

　　　5, two groups of two splitters were fixed with two front inside the machine base

　　　The side guide bar support can slide along the guide rod.

　　　6, the reduction of sub-reduction device in the left side of the machine by the pulley, spur gear pair components. The large gear (eccentric) mounted on the shaft of the small connecting rod, the other end of the connecting rod is connected with two points.

　　　Connecting rod length can be adjusted two splitters in the crusher feed opening the gap a lot lower 5mm.

　　　7, power, check the spindle rotation direction should be consistent with the direction of the arrow.

　　　8, broken by the mesh size control, HRG-180 × 150-type machine with a φ8.5, φ6, φ3.5mm three kinds of hole sieve, which the particle size was <6mm, <3mm, <1mm; HRG -250 × 360 model is equipped with φ13, φ6 long hole sieve, which the particle size was <10mm, <3mm. Any special requirements should be specified in the contract specific aperture sieve.

　　　

methods of operation and safety precautions of APEX-YLF389-70A hammer crusher for coal:

　　　1, the machine using the power 380 ± 10V/50HZ three-phase AC power supply, the user should make their own connected with 380 volts / 15 amp three-phase AC knife switch, knife switch the machine should be installed at a distance of 2 to 3 meters, wiring should be safe and reliable and has a ground wire.

　　　2, the boot before filling oil in the lubrication point and check all fasteners loose, drive belt tension level, work must be empty before running for 1-2 minutes, check whether the rotor rotation direction arrow mark direction ( Otherwise, the power of any two-phase relative adjustment to ensure operation in the same direction), after confirming that no abnormal sound in order to start working.

　　　3, sample preparation, the first sample will be added into the feed hopper, stamped seal, press the starter button protector, when the motor is running normally, then the hopper gates slowly lift the handle, so that kind of uniform material into the crusher cavity.

　　　4, stop, you must add the feed hopper-like, completely through the crusher is finished, then stop the motor running.

　　　5, into the crusher broken material samples should be strictly checked to prevent metal objects or explosive debris, such as detonators and other mixed material samples, to avoid accidents.

　　　6, the machine hopper and the volume of the sampler connected to 1:1.5, the operator according to the number of material samples, successive loading hopper, the hopper whenever the batch of material samples should be shut down after crushing , taking the pick sampler, the sample was poured out, and then follow the steps above cycle operation until all the broken material sample is completed.

　　　7, the upper body lifted can rely on a bracket for broken clean, repair and replace sieve.

　　　8, both ends of the spindle bearing lubrication and reduced splitter gearboxes, according to running conditions, often filling the right amount of grease.

　　

Each APEX-YLF389-70A hammer crusher for coal we sell through rigorous inspection, product quality and ensure the best possible protection and will not appear shoddy or selling defective products, to buy our machines is the pursuit of high cost, you buy is not only the product itself, as well as the professional services provided for the product and quality assurance.

Technical parameters of APEX-YLF389-70A hammer crusher for coal:

model	APEX-YLF389
Rotor diameter	180mm
Rotor length	150mm
Feeding size	<50mm
The particle size	<6-1(Adjustable)mm
Reduction percentage	1/8
Productivity	600-300kg/h
Speed	1400r/min
Noise	<80dB
Dimensions(L *W *H)	900*760*1300mm
Weight	200kg

Packing List:

round hole sieve 4
ground pin wire 4

Manual 1
certificate 1
Warranty 1