Home  >  Related Services  >  Machinery Agents

1.State-owned factory, 2.High level ccr line, 3.Turnkey project, 4.Professional quality for rolling, 5.Good after-sales services - details see: https://www.machineto.com/aluminum-rod-continuous-casting-and-rolling-machine-10366432

§Equipment use

The aluminum rod continuous casting and rolling machine is special for producing electrical aluminum rod with dia. 9.5mm by mean of continuous casting and rolling way.

§Equipment feature

1. The aluminum rod continuous casting and rolling machine is competitive with the relative international products.

2. By adopting PLC and man-machine interface for the complete line control, it can check and display the running parameter of machines as well as indicate the breakdown.

3. The aluminum rod continuous casting and rolling machine is with perfect outlook and lower noise and vibration.

4. The aluminum rod continuous casting and rolling machine is easy to disassemble and assemble.

5. High efficiency and quality of production & low dissipation energy.

§ Equipment composition

1. The aluminum rod continuous casting and rolling line is composed of melting furnace, holding furnace, casting machine, donkey engine, seven-stand rolling mill, take-up machine, electric control system, etc.

2. Molten aluminum or prepared aluminum melt flows from the holding furnace via the launder into the rotary continuous casting machine, where it is continuously casted into a trapezoidal ingot with a cross-sectional area of 600mm². The hydraulic shearer cuts off the waste end and press it smaller or pointed so as to feed into the rolling machine, where it is rolled into rods of dia. ø9.5mm, and after passing through the grease box and guide pipe, aluminum rod is finally laid down in coil in the basket on the trolley.

§ Technical Datas

Casting Machine	Crystallizing wheel dia	Φ1200mm
	Section surface of casting ingot	600mm2
	Casting speed	280mm/s
	Driven motor	1.5 kw (AC)
	Type of casting machine	2-wheel
Cantilever balancing pendant oil hydraulic shearer	Max. shearing force	12000 kgf
	Max. shearing stroke	65 mm
	Motor power	4 kw
Rolling Mill	No. of rolling stand	7
	Outlet rod dia	Φ9.5mm
	Max. production capacity	1.6 t/h
	Finished rolling speed	2.45 m/s
	Center height	902.5mm
	Main motor	75 kw
Rod Coiler	Coiling weight	1.5~2 t
	Max. coiling diameter	ø 1850 mm
	Coiling driven motor power	2.2 kw