Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

1.Type: Gasket Plate Heat Exchanger, 2.Equivalent Alfa Laval M15M, M15B series, 3.Max.pressure:10/16 bar, 4.Power: 300-800KW - details see: https://www.machineto.com/alfa-laval-m15m-m15b-replacement-gasket-plate-heat-exchanger-300-800-kw-for-chemical-industry-bh150-series-10241738

Alfa Laval M15M, M15B replacement Gasket Plate Heat Exchanger 300 to 800 kW 16 kg/s (250 gpm) for Chemical IndustryBH150 Series

Model	BH150B / BH150H
Cross Reference ALFA LAVAL	M15M, M15B
Height, H [mm]	1885	1885
Width, W [mm]	610	650
Min standard length, L [mm]	1150	1150
Max standard length, L [mm]	2050	3250
Vertical port distance, VC [mm]	1294	1294
Horizontal port distance, HC [mm]	298	298
Max temperature [°C]	180	180
Max pressure [barg]	10	16
Flange size	DN150/6”	DN150/6”
Max. flow rate [kg/s]	80

Material of Plate		Suited Liquid Kinds
Stainless Steel (AISI304.316 Etc)		Pure Water, Normal Water, Oil for eating, Mineral Oil
Ti, Ti-pd		Sea Water, Saline Water, Mineral Water
20Cr, 18Ni, 6Mo (254SMO)		Dilute Sulphuric Acid, Organic Water Solution
Ni		High-temp and concentration caustic soda
Hastelloy (C276, D205, B2G)		Concentration Sulphuric Acid, Hydrochloric acid, Phosphoric acid
Material of Gasket	Operating Temperature ° C		Suited Liquid Kinds
NBR	-15~+135° C		Water, Sea Water, Mineral Oil, Salinous Water
EPDM	-25~+180° C		Hot Water, Steam, Acid, Alkali
F26	-55~+230° C		Acid, Alkali
TPF	0~+160° C		High Concentrated Acid, Alkali, High temperature Oil, Steam

Applications

General heating and cooling duties. Heating by means of steam.

Standard design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the

two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate

and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which

seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined

by the flow rate, physical properties of the fluids, pressure drop and temperature program.

The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame

plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both

of which are fixed to a support column.

Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit,

in the frame and pressure plates.

Typical capacities

Liquid flow rate

Up to 16 kg/s (250 gpm), depending on media, permitted

Pressure drop and temperature program.

Water heating by steam

300 to 800 kW

Working principle

Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate

channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created

for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each

plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support