Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Chip Machines

1.Automatic feeding, 2.Low dust&lower energy consumption, 3.Strong drying strength, 4.ISO9001:2008&CE, 5.Bigger capacity - details see: https://www.machineto.com/agricultural-waste-dryer-machine-10349397

Introduction of Pipeline Type Sawdust Dryer

Hot airflow pulse sawdust dryer, also called pipeline type hot air sawdust dryer, adopting twice circulate heating system, is our newly

developed advanced sawdust drying machinery, and show the features of automatic feeding, high hot airflow speed, fully mixing of

airflow and materials, big drying strength, lower dust and bigger drying capacity. Moisture in the raw mateials of less than 40% can

be dried at one time to meet the requirement for coal bar production, which greatly reduced the labor intensity compared with other

dryers.

Material to dry

Particular material as rice shell, saw dust, and ground wood chip, tree branch, wood bits, etc.

Working Rules of Sawdust Dryer

1. After installation, start the blower, check the direction it runs and see if the suction at the material inlet is normal.

2.Tie up a bag whose both ends are open around the outlet of the dust catcher.

3.Feed the material to be dried to the hopper. Remove large grain in the material before drying, which will benefit drying speed.

4.Put fuel into the furnace and light it, start the blower. When the air temprature at the outlet of the blower get to 100°C, begin feeding and drying.

5.Large piece of the material at dregs-outlet must be removed, which is favourable to feeding.

Notes of Pipeline Type Sawdust Dryer

1.The machine must be grounded well.

2.The exhaust vent of the dust catcher must not be indoor, a flue pipe should be made to exhaust the gas outdoor, and the chimney must be at least 500mm higher than the roof.

3.The large grins of material should not put into the hopper.

4.When material does not get in easily, check the vane of the blower, remove the dust sticking to it.

Parameters of Pipeline Type Sawdust Dryer

Model	III	IV
Power(kw)	7.5	18.5
Capacity(kg/h)	600-700	900-1000
Pipe diameter(mm)	300	400
Pipe total length (m)	39	51
Install length(m)	18	25
Install width(m)	1.8	2.5
High of duster (m)	4	4.2
Feeder size(mm)	400*500	400*500
Weight (kg)	2000	3500

Note: The above technical parameters are just for your reference.