Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Road Machinery  >  Asphalt Mixers

Asphalt Drum Mix Plant with output capacity of 60 Tons / hour. - details see: https://www.machineto.com/60-tph-asphalt-mixing-plant-10115360

Type:Continuous Drum Mix type Asphalt Plant

Stationary & Mobile type.

Model:SDM-40

Output Capacity:60 TPH @ 2% moisture content.

Main Components & Technical Specifications of Asphalt Drum Mix Plant standard supply:

Four Bin Feeder:For cold aggregate storage -capacity 40 tons. Each bin having independent discharge gate & variable speed auxiliary belt drive for proportioning of aggregates.

Single Deck Vibratory Screen:For oversize material removal. Screen mesh size 40 mm.

Slinger Conveyor:Endless rubber belt conveyor –7.5 mtrs.long driven by 5.0 HP AC motor & shaft mounted gear box.

Rotary Drum:For drying, heating & mixing of aggregates with asphalt (bitumen) and filler material.Drum ø 1200 mm x 6000 mm length, chain driven by20.0 HP AC Motor& worm reduction gearbox.

Dryer Burner:High pressure jet, two stage burner suitable for LDO & Diesel fuel.

Primary Dust Collector:Multi cone type with worm screw is mounted on same chassis of Rotary Drum and is fitted adjacent to hot mix asphalt output chamber.

Load Out Conveyor:Heat Resistant endless rubber belt conveyor –9.5 mtrs. long driven by5.0 HP AC motor& shaft mounted gear box. Hydraulically operated Gob Hopper is fitted at the discharge end of conveyor to deliver the hot mix asphalt in to the tipper without segregation.

Asphalt Tank:Insulated round shape asphalt storage tank of20,000 liters. The tank is fitted with bitumen pumping station consisting of5.0 HP variable speed AC Motorcoupled with worm reduction gearbox & jacketed bitumen pump.

Mineral Filler Unit:Consists of1.5 tonscapacity hopper with rotary valve, driven by2.0 HP AC variable speed motor, to deliver the filler material into the mixing zone of Rotary Drum. The filler material is conveyed pneumatically by5.0 HPblower.

Fuel Tank:Storage capacity4000 ltrs.with piping.

Secondary Dust Collector:Wet Scrubber type with Venture Duct & nozzles to absorb the dust & gases escaping from Primary Dust Collector. System supplied with3.0 HPmonoblock water pump. Exhaust Blower fitted on the same chassis with20.0 HP AC Motor.

Control Panel:Electronic Control Panel with Printer for operating & controlling the Asphalt Plant.

Control Cabin:Insulated Cabin with Air Conditioner for housing the control panel and operating the Asphalt Plant.

• Note:sizes & capacities are for our standard model; however they can be altered as per the customer’s specific requirement.