Home  >  Industrial Supplies  >  Machinery Engines

6 cylinder warter cooled generator diesel engine, 1.Engine Brand: FAWDE, 2.Discharge : EURO II/III, 3.Water cool, 4.Four strock - details see: https://www.machineto.com/6-cylinder-warter-cooled-generator-diesel-engine-10232829

Generator diesel engine

FAWDE brand introduction:

WUXI FAWDE Engine company is the Joint venture company betweenSweden Volvo Pentaand China FAW company since June 1997.The main products is original Volvo industry diesel /Car/Marine Engine, power from 68kw to 500kw. With the VOLVO open market in China, the Volvo company break away from FAW company. But the WUXI FAWDE company always use the original Volvo produce technical and parts keeping the good quality. Now the FAWDE become the China Famous Engine brand, it stand for the top technical level all over the world.

FAWDE engine advantage:

1.Discharge approval EURO II standard, Low noise

2.Low fuel consumption 198g/KWh, reduce at least 8-10g/KWh.

3.Design exquisite , small volume, light weight and (these can better reduce the fuel consumption)

4. GAC Diff Press , four valves per cylinder

5.The main parts all use the original Sweden Volvo parts.

Specification:

General
Engine type	6DF2D-14D	6DF2-17D	6DF2-19D
No.of cylinders	6-cylinder	6-cylinder	6-cylinder
Working cycle	4-strock	4-strock	4-strock
Bore diameter*Stroke(mm)	110*115	110*125	110*125
Displacement(L)	6.56	7.13	7.13
Compression ratio	17:1	17:1	17:1
Dry weight of base(kg)	650	650	650
Dry weight of Gen Pac(kg)	687	687	687
Performane(without fan)
Rated speed(rpm)	1500	1500	1500
Prime power (kW)	110	130	140
Standby power(kW)	121	143	154
Max.torquemoment(N.m)	770	920	980
Emmision compliant	stageII	stageII	stageI
Steady state speed regulation	≤3	≤3	≤3
Lubrication system
Oil capacity including oil filter(L)
Oil consumption(L/hr)	≤0.08	≤0.08	≤0.08
Fule system
Fule consumption of prime power at different load(g/kWh)
75%	204	204	202
100%	202	202	202
Intake and exhaust system
Air consumption(m3/min)	7.28	8.60	9.27
Max allowable air intake restriction(kPa)	6.30	6.30	6.30
Exhaust gas temperature after turbine(°C)	450.00	460.00	470.00
Heat rejection to exhaust(Kw)	76.66	92.61	101.90
Max allowable back pressure in exhaust line(kPa)	6.70	6.70	6.70
Exhaust gas flow(m3/min)	16.76	20.08	21.91
Cooling system
Heat rejection form engine(kW)	6.60	7.80	8.40
Heat rejection to coolent(kW)	55.00	65.00	70.00
Heat rejection to intercooled(kW)	14.27	16.86	18.16
Fan diameter(mm)
Fan speed(rpm)
Fan power consumption(kW)	4.95	5.85	6.3

Auto workshop:

Test room:

The test room total investment over two hundred million, the discharge test equipment , Dual PDA and so on equipment import from Germany, Austria, USA, Japan. The isoperibol test can keep temperature -40°C-60°C. So the engine can approval Euro II/III standard.

Certification: