Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Industrial Chiller

1. Model: MG-6C air industrial chiller, 2. Input power: 6.33KW, 3. Compressor power: 5.2kW, 4. Cooling air flow: 6000m3/h - details see: https://www.machineto.com/5ton-industrial-air-cooled-chiller-10243384

Industrial Air Cooled Chiller MG-6C

1. Description of air cooled chiller

Air-cooled industrial chillers are widely used in the plastics industry, where precision temperature control is required when cooling molds to achieve higher quality of the product surface finish and lower cycle time.

Air cooled chillers are also intended for numerical-controlled (NC) lathes, die-casting machines, lasers, foodstuff and medical apparatus, and plating process machines.

2. Technical data sheet of air cooled chiller

Model	Unit	MG-6C
Nominal cooling capacity	kcal/h	13115
	KW	15.25
Input power	KW	6.33
Set temp. range	5ºC~35ºC
Power supply	3PH-380V-50HZ
Refrigerant	Type	R22/R134a/407c
	Type of control	Thermostatic expansion valve
Compressor	Type	Hermetic scroll
	Power(kw)	5.2
Condenser	Type	Finned copper tube + low noise outer rotor fan
	Cooling air flow(m3/h)	6000
Evaporator	Type	Tank with coil/shell and tube
	Chilled fluid flow(m3/h)	2.63
	Volume(L)	70
	Inlet and outlet pipe diameter	1"
Pump	Power(kw)	0.75
	Lift(m)	20
Dimension	Length(mm)	1140
	Wide(mm)	560
	High(mm)	1040
Weight	kg	180
Safety protection	compressor over temperature, over current, high and low pressure, Phase sequence, phase-missing
Note: Nominal cooling capacity is according to: 1. Inlet chilled fluid temperature: 12°C; 2. Outlet chilled fluid temperature: 7°C 3. Inlet cooling air temperature: 30°C; 4. Outlet cooling air temperature: 38°C

3. Components of air cooled chiller

4. Producing process of air cooled chiller

5. Applications of air cooled chiller

6. Working principle of air cooled chiller

7. Factory

8. Certificates