Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Other Industrial Filtration Equipment

560G paint booth ceiling filter EU5:, 1.capturing 1-10aam particles,, 2.especially for the top part of spray booth,prefiltration - details see: https://www.machineto.com/560g-paint-booth-ceiling-filter-eu5-10229434

SKT-560G paint booth ceiling filter EU5

Surface glue ceiling filter

Based on the market requirements, this series is improved, we reduce the cost properly, low down the dust holding capacity and increase the air flow rate, quality and cost match better.

1.capturing 1-10aam particles,
2.especially for the top part of spray booth,prefiltration

3.Low initial resistance

4.Large dust holding capacity

5.Flexible,Outlet side with net or cloth mesh to reinforce

Application: capturing 1-10μm particles,

especially for the top part of spray booth,

prefiltration mesh to reinforce through air

filter system, diffluent equally

Type: supply pads or rolls size

Media: synthetic fiber with gradual density,

surface of inlet side with adhesive treatment

EN779 class: F5

Average arrestance:96%(ASHRAE52.1-1992)

Average efficiency: 45%-55 %(ASHRAE52.1-1992)

EUROVENT4/5 class: EU5

DIN53438 Non-flammability Standard: F1

Final resistance: (suggested) 400Pa

Max. Dust holding capacity: 450g/m2

Temperature resistance: 100°C

Instant temperature: ≤120°C

Surface glue ceiling filter with net

This series is the economic development of the ceiling filters, we use the longer hot melt anti-broken synthetic fiber and high quality water resin for this series,the air flow rate was increased. It is suitable for the lower required working areas.

Model	SKT-560G	SKT-520G
Weight:	560gr/sqm	520gr/sqm
Thickness:	20mm	20mm
Air Flow Rate:	936m3/h	970m3/h
Initial Resistance:	23pa	22pa
Final Resistance:	400pa	400pa
Medium Arrestance:	93.10%	92.50%
Air Velocity:	0.26m/s	0.27m/s
Dust Holding:	375gr/sqm	362gr/sqm
Max Temperature:	1200C	1200C
Filtration Class:	F-5(DIN 24185)	F-5(DIN 24185)
Flame Resistance:	F-1(DIN 53438)	F-1(DIN 53438)

Surface glue ceiling filter with TC fabric

This series is the economic development of 600G, we still use longer hot melt anti-broken fiber and water resin. The only difference is that we use the production method of surface glue spray in order to reduce the cost to meet the economic demands in the markets, the capacity of dust holding and the filtration efficiency are lower than the solid glue filters. The requirements for air pressure are lower.

Model	SKT-1 560G	SKT-1 520G
Weight:	560gr/sqm	520gr/sqm
Thickness:	20mm	20mm
Air Flow Rate:	936m3/h	972m3/h
Initial Resistance:	23pa	22pa
Final Resistance:	400pa	400pa
Medium Arrestance:	93.50%	92.90%
Air Velocity:	0.26m/s	0.27m/s
Dust Holding:	385gr/sqm	372gr/sqm
Max Temperature:	1200C	1200C
Filtration Class:	F-5(DIN 24185)	F-5(DIN 24185)
Flame Resistance:	F-1(DIN 53438)	F-1(DIN 53438)