Home  >  Industrial Supplies  >  Laser Equipment Parts

Compact 532nm Green DPSS Laser, 300mW CW Output Power, High Quality TEM00 Beam, High Reliability - details see: https://www.machineto.com/300mw-532nm-dpss-green-laser-t3-series-10231169

GL532T3-300
Optical Parameter
Output Wavelength	532±1nm
Output Power	300mW
Spatial Mode	TEM00
Operating Mode	CW
Mode Quality (M2)	<1.2
Beam Divergence, Full Angle	1.5 ± 0.2mrad[1]
Beam Diameter (1/e2) @ Exit	2.0 ± 0.2mm
Power Stability	5% (rms, over 2 hours, T= 25°C)[2]
	10% (rms, over operating temperature)
Beam Pointing Stability	<50μrad over 2 hours (ambient ±5°C )
Polarization, Linear	>100:1
Amplitude Noise (20Hz to 20MHz)	~30% rms
Residual IR	<0.1%
Electrical Parameter
Power Supply	ADR-700A	ADR-700D	DDR-7005
	Adjustable PSU with LED Display	Desktop PSU	5VDC Driver
Input Voltage	85~240VAC, 50/60Hz		5VDC
Modulation	10KHz TTL Modulation & 10KHz Analog Modulation[3]	10KHz TTL modulation or 10KHz Analog Modulation (optional)[4]
Mechanical Parameter
Dimensions of Laser Head	140. 8 × 73 × 46. 2mm
Weight of Laser Head	0.6Kg
Dimensions of Power Supply	154 × 155 × 95mm	133 × 130 × 65mm	100 × 60 × 56mm
Weight of Power Supply	1.5Kg	1.2Kg	0.2Kg
Reliability
Warm Up Time	<10 minutes
Cooling	Forced-air cooled[5]
Operating Temperature, Case	10°C ~ 35°C
Storage Temperature	-20°C ~ 60°C
Expected Operation Lifetime	10000 hours
Warranty	12 months[6]
Note
[1]0.5mrad or 1.0mrad beam divergence is available upon request. [2]Better power stability (<1% rms or <3% rms, over 2hours, 25°C) is available upon request. [3]TTL+ (0=laser off, 1=laser on), TTL-(0=laser on, 1=laser off) and Analog modulation can be switched by a toggle switch on the back panel of the power supply. [4]30KHz TTL modulation or 30KHz Analog modulation is available upon request. [5]The Laser is designed to operate without heat sink. Do not restrict air circulation around the device; an additional heat sink can be used to maximize the performance and life time of the laser. [6]2-Year Warranty is available upon request.