Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Carbonization Stove

Carbonization furnace, 1.No pollution;, 2. Easy to operate;, 3. For raw materials: coconut shell, bamboo, wood logs etc. - details see: https://www.machineto.com/30-discount-wood-charcoal-carbonization-furnace-carbonization-stove-for-wood-charcoal-10341722

30% discount!!! wood charcoal carbonization furnace/ carbonization stove for wood charcoal

Working Principle of carbonization furnace
Charcoal carbonization furnace is the ideal equipment for wood briquettes to have anoxic distillation carbonization. Charcoal carbonization furnace adopts the method of dry distillation and natural carbonizing heating the wood stick until it divide into fuel gas, tar and charcoal. Because of the reasonable structure, the charcoal carbonization furnace needs small quantity of heat consumption only. The charcoal carbonization furnace is equipped with superheated stream cooling system. Thus the cooling process can be speeded up for 4-12 hours, and the production cycling time can be shorten to 24-48 hours.

Application of continuouscarbonization furnace

Charcoal carbonization furnace is the ideal equipment for wood briquettes to have anoxic distillation carbonization. The final products charcoal briquette bars can be used for heating furnace, industrial boilers, biomass power plant. Barbecue and so on.

Workflow ofcontinuous carbonization furnace

Advantagescontinuouscarbonization furnace

1.Unique structure;

2. Environmental friendly;

3. Advanced carbonization technology;

4.Great carbonizing ratio (increased from about 88% to 99%)

Carbonization stove adopt superior purifying technology, and is made from special high temperature resistant material, and show the features of stable and wear well, freeing from oxidation and deformation, superior insulating property, easy operation, safety and reliable, no carbonization blind spot with double chimney, and the finished products ratio are more than 95%, labour and time saving, and one person can operate several carbonization stove simultaneous.

Final products:

Instruction ofcontinuouscarbonization furnace

1. The carbonization of the old-type furnace takes advantage of spontaneous combustion

of biomass briquettes. But the new-type furnace adopts the dry distillation of charcoal technology and also the output charcoals are with good quality and show

metallic luster.
2. The production of old-type is sporadic, and the new type is continuous which improves the production efficiency to a great

extent.
3. The old-type makes plenty of heavy smoke, even if with the cooling treatment, it still brings the serious air pollution.

Different from the oldtype furnace, the newtype does not exhaust the heavy smoke from the carbonization process to the air,

oppositely, it collects. The smoke goes intothe burner through the pipes and burns as fuel gas for recycling use, to reach the aim

of replacing the normal fuel and continue the carbonizing process.

The design of new-type furnace avoids the air pollution of heavy smoke exhausted.
4. The operation of oldtype is quite complicated, before carbonization, the briquettes need to be put properly which wastes too much time and labour.

However, the briquettes can be put irregularly and then process carbonization directly, saving much time and labour.
5. The production efficiency of the oldtype is low. Every 24 hours, the output of 5m³furnace is only around 1 ton. By contrast, due to the design of continuous production,

the new-type furnace can produce around 200 kg charcoals every 1-2 hours, The efficiency of the new type is completely 4 times more than the old-type, which greatly reduce the expenses spent in a great amount of old-type equipments when target capacity is high.

Technical Parameters ofcontinuouscarbonization furnace:

Model	Tech spec
THL-4	Output: 500kg/8hours Carbonizing time:8hours Carbonizing rate:99% Overall size: 2.8*2*2(m) Weight(t):3.5
THL-6	Output: 770kg/8hours Carbonizing time:8hours Carbonizing rate:99% Overall size: 3.5*2*2(m) Weight(t):4
THL-8	Output: 1000kg/8hours Carbonizing time:8hours Carbonizing rate:99% Overall size: 4*2*2(m) Weight(t):5T

Certifications

Our promise & after sale service:

1.All the machines will be checked ok before delivery.

2. 7*24hours online slove our global Client issues

3.Train operating personnel at free

4.Appoint specialized after-sale service staff to your country for installation and debugging the equipment.

5.Provide Spare parts in cost price after installed 2 years

6.afford Air tickets cost to our factory if place order

7.Fill price difference if find our price higher then others of china at same period

8.Provide tourist in china 2 days if order Value exceed USD10,000

Contact me!