Home  >  Industrial Supplies  >  Motors  >  Stepper Motor

Digital control, strong capacity of interference resistance, low motor noise - details see: https://www.machineto.com/3-phase-stepper-driver-motor-xinje-dp7022c-10238830

Digital control, strong capacity of interference resistance, low motor noise

Power supply up to 220VAC or 336VDC, output current can be 7.0A
Two working modes: Internal pulse mode and external pulse mode

Dynamic selectable subdivision, any levels for current setting
Can drive any 3,6 lines three phases stepper motor below 7.0A
Protection for over voltage, over current, lack phase, under voltage, output short circuit.

DP-153	Maxi pulses/rev: 25600 24V pulse input	Two phases mixed type (4,6,8 lines)	DC12-30V	0-1.5A
DP-153-L	Maxi pulses/rev:25600 5V pulse input	Two phases mixed type (4,6,8 lines)	DC12-30V	0-1.5A
DP-304	Maxi pulses/rev:12800 24V pulse input	Two phases mixed type (4,6,8 lines)	DC12-40V	0-2.5A
DP-304-L	Maxi pulses/rev:12800 5V pulse input	Two phases mixed type (4,6,8 lines)	DC12-40V	0-2.5A
DP504	Maxi pulses/rev:40000	Two phases mixed type (4,6,8 lines)	DC20-40V	0-5A
DP-504-L	Maxi pulses/rev: 40000 5V pulse input	Two phases mixed type (4,6,8 lines)	DC20-40V	0-5A
DP508	Maxi pulses/rev: 40000,24V pulse input	Two phases mixed type (4,6,8 lines)	DC20-80V	0-5A
DP-508-L	Maxi pulses/rev: 40000,5V pulse input	Two phases mixed type (4,6,8 lines)	DC20-80V	0-5A
DP708	Maxi pulses/rev: 65535	Two phases mixed type (4,6,8 lines)	DC80V	0-7A
DP3022	Maxi pulses/rev: 65535,digital display, RS485 communication	Three phases	AC220V	0-3A
DP7022	Maxi pulses/rev: 40000	Three phases	AC220V	0-7A