Home  >  Industrial Supplies  >  Motor Parts  >  Motor Driver

1. High quality with high speed optical and DCDC, 2. Competive price, 3. In time delivery, 4. Good commucate and aftersale servi - details see: https://www.machineto.com/3-nema23-stepper-motor-270oz-in-3-axis-board-cnc-kit-10234638

3 NEMA23 stepper motor 270oz-in+3 axis board CNC kit

1. 3 axis stepper motor driver board

CNC stepper motor driver board TB6560,the new chip TB6560AHQ of TOSHIBA, the max ouput peak current can reach to 3.5A , this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.

Features:

1. it can drive three axis,The 4^thaxis expansion, to facilitate your needs 4-axis machining when working
2. Spindle relay output, easy to use software such as mach3 to control spindle start and stop.
3. Semi-flow control functions, and effective to stop the motor when the current is reduced to a minimum.
4. Interface with a fan, you can add fan under your choice.
5. With 3 wire 0.8-3.5A (peak) rated output of two-phase adjustable-current bipolar stepper motor drive;
6. Standard parallel port interface, support for MACH2, KCAM4 series software;
7. With optical isolation and DCDC power supply isolation, the full protection of your computer parallel port and equipment;
8. with limit switch,can connection 4 aixs limit switch
9. Support four microstepping ——1,1/2,1/8,1/16
10. 12—36V single switching power supply,microchips to use as a 5V power supply, stable and heat small
11. Using RC +7414 automatic semi-flow,the current automatic reduce when stepper motor stop to down the heat

2. Stepper Motor

Technical Specifications

Part No.: 23HS8430

Frame Size: NEMA23

Step Angle: 1.8 degree

Current: 3.0A/phase

Resistance: 1.0 Ohm/phase

Inductance: 3.5 mH/phase

Holding torque: 180N.cm/18kg-cm 270oz-in

Rotor inertia: 440g-cm2

Number of wire leads: 4

Weight: 1.05 kg

Length: 76mm

Shaft : single shaft,8mm diameter,21mm length with double 8mm flat length

Note:if you need double shaft pls contact us,we can produce.

RED A+

GREEN A-

YELLOW B+

BLUE B-

3.Switching power supply

250W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:24v/10A,single output switching power supply

Package include:

• 1 x 3 axis TB6560 Stepper Motor Driver board V type
• 1 x DB25 parallel cable
• 1 x Fan,4pcs M4 screw
• 3 x 23HS8430 stepper motor
• 1 x 24V/10A switching power supply
• English user manual for 3 axis driver board will send by email

Shipping

• Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately
• We ship toWolrdwide
• When weight less than 2kgs,we usually ship by Hongkong Air Post which will take round 10-15 business days. some areas may be later due to variation of postal service in different areas,if above 2kgs we can ship by DHL/UPS/EMS which need confirm by us

DHL/UPS 5-8 business days

EMS 4-10 business days

• All items will be shipped within 1-3 business days upon receipt of payment

Payment

• We accept paypal payment,all Paypal must be confirmed(shipping and billing address must match and correct)
• Payment must be made within 48hours of the auction end time
• Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

Problem&Feedback

• Please give us the opportunity to resolve any problem when you have,we concern your problem and we will try our best to resolve it.
• Pls email us before you want to leave any negative feedback

Refund

• When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos
• Any reason refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost

Contact us

• Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
• Customer’s satisfaction is very important to us.