25tons/day Block Ice Machine with Cold chain

Ti pipe is used as evaporative coil to improve the heat transfer effect, and its stainlessness, anti-corrosion feature can guarantee the long service time.

PE material is adopted in the parts of thawing tank connecting the brine and fresh water and it is stainless and low temperature-resistant.

Unique design of ice thawing tank and ice dumping unit brings easier operation.

The thawing tank is heated by hot gas discharged from the compressor so that it is more energy saving and makes the ice maker more suitable for areas where water temperature is low.

Module design makes the ice maker easy to transport, move and install.

Every brine refrigeration block ice machine can be designed and produced according to your specific requirements.

The brine refrigeration block ice maker machine can be installed in 20ft or 40ft brand new container with other relevant equipments.

Focusun brine block ice machine, block ice maker workflow:

1. Feeding water in ice moulds.

Lift up the lower seal plate to be fastened in the fixed handle and get the whole aluminum alloy plate sealed, and then add water in the ice cans to the standard water level.

2. Saltwater agitator makes the saltwater flow cyclically/ ice making process

The refrigerant will have water-heat exchanger in the ice cans through refrigerant runner to lower the water temperature and in a certain time, all the water in the ice can will turn into block ice.

3. Water in Ice moulds. frozen./ ice frozen finished

Saltwater in brine tank cooled with refrigeration system running and saltwater flow cycling, which makes the water in ice moulds frozen.

4. Melting block ice moulds.

When ice making is finished, open the lower seal plate manually and refrigeration system will change into doffing ice mode automatically in which HPHT refrigerant air will release heat in the refrigerant runner that will melt the surface of block ice in the ice cans.

5. Remove / harvest ice.

Damp the ice block from ice can with dumper, then store block ice

The Ice Making & Harvesting section of the plant consists of the Brine Tank, an electrically operated Lifting Device (Crane) running on rails along the sides of the tank, a Thawing Tank, a Tilting Device with an inclined Wooden Table to receive the ice blocks as they slide out of the cans and a Filler.