Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Ice Machines

ice shaving machine1:Ice thickness can be ajusted, 2:Make ice into snow, 3:Draw-out type structure, 4:Warranty is 12months, 5:Ca - details see: https://www.machineto.com/2013-ks-168-hot-sale-commercial-electric-ice-shaving-machine-with-one-year-warranty-10242361

KS-168 hand ice crusher
Maintenmace:Keshi warrants to the original purchaser ,found to be defective in material or workmanship for a period of one (1) year from the date of original installation. meanwhile,provide spare parts needed for maintenance in cost prices to ensure the service life of product.

Main parameter:

1:Voltage/Hertz/Phase 220Volts/50Hz

2:Amperage 20Amps

3:Power Consumption:250W

4:Material:ABS

5:Production Capacity :6kgs/min

6:Size:38X30X46cm

7:Weight:22kgs

Model	Voltage	Power	Outlook Dimension	Weight	Output	PC/20'
KS-158	220V	180W	38X30X46cm	18Kg	240Kg/H	450
KS-168	220V	250W	38X30X46cm	20Kg	360 Kg/H	450
KS-198	220V	250W	38X30X72cm	22Kg	480Kg/H	230
KS-268	220V	250W	43X30X72cm	30Kg	360 Kg/H	230
KS-288	220V	180W	43x30x72cm	12Kg	108Kg/H	200

Instruction:

1.Open the lid and sweep the slot. And then check the blades to be stably fixed.

2.Check the power cable. Turn off the switch and plug the power.

3.Opn the lid of the water-cooling machine and then put some ice-blocks before close the lid.

4.Press the start button.

5.Modulate the blade according to the need of the shapes of the ice.

6.Diameter of the ice-block of 4-5cm is preferable,.

Attention:

1.The voltage should be the 220V

2.The lid should be equipped with protection device, which makes this machine impossible to operate if the lid has not been closed even if the start button has button pressed.

3.The machine should be fixed at a flat place and the quantity of the ice should be thrown into the slot uniformly to prevent the body from shaking.

4.The quantity of the ice should be lower than the place that is high than the red line by 1cm in the slot.

5.The cleaning process should be operated by clothes but not by water.

6.Every the water in left in the slot should be cleaned after using.

7.Pay attention to the blade when cleaning, so that the fingers will not be injured.

8. Do not detach the parts of the machine freely.

shaving area(the difference of Keshi factory and other most factories)

a molding (Keshi) casting(other factory)

Comparison of internal chassis

AISI304 stainless steel (Keshi factory) aluminum(other factory)

Caliber size

15cm (Keshi factory) 11cm(most other factories)

many models are available

KS-158

KS-198

KS-268

KS-288