Home  >  Raw Material Processing Machinery  >  Rubber Raw Material Machinery

1)ISO9001,ISO14001, 2)Auto welding, 3Life more than 6 years, 4)Lifelong maintenance, 5)Pollution-free & Alarm system - details see: https://www.machineto.com/2012-waste-tyre-plastic-recycling-pyrolysis-plant-10340771

2012 HOT SELLING ! NEW DESIGN! Pyrolysis Oil Machine

The brief introduction of our pyrolysis machine:

NO.1) The model and capacity:

The fuel can be : Fuel oil, heavy oil, coal, firewood.

NO.3) End product percentage(for example :the raw material is tyre)

NO. 4) Machine motor Power :

NO.5) Containers:

NO.6) The machine installation:

We will give the foundation drawings to buyer after make the order .we will send engineer when buyer get the machine. The engineer mainly install the machine and training your workers.

NO.7)The machine cover area:

The machine itself cover 300 square meters(length 20M ; Width 15M),Add

raw material stay, carbon black stay, big oil tank zone ,workers rest room

and simple office. At least 600-800square meters.

NO.8) How many workers need operate machine:

4 workers is enough for one set machine.

NO.9) catalyst formula:

we will supply the catalyst formula after you order the machine,you can buy it at your local.

NO.10) Delivery time:

We will delivery the machine within 15days after get the advance payment(30% of the total amount).

The main composed parts and advantages:

(1)Feeding-in system:

The raw material can be waste tyres, rubbers or plastic. If your raw material is plastic, we suggest that you use the auto feeder. If your raw material is waste tires, we suggest that you use belt conveyor.

(2)Pyrolysis system:

The reasonable thickness, it is easy to heat and easy to be cool down.

(3)Heating system:

There are various kinds of fuel, such wood, charcoal, coal, LPG etc.

(4)Deducting system:

They usually have one or two equipments for deducting, we the three, desulfurization scrubber, water film cyclon and the advanced bag deduster.

(5)Impurities removing system:

There are two devices for removing the impurities from the oil gas, one is gas separate tank, the other is depositing tank.

(6) Cooling system:

We have the new design for the cooling system; it has better cooling effect and high oil yield.

(7)Oil Store system: For store the oil.

(8)Waste gas recycling system:

It is also named water seal, it has two effects, and one is for the gas separate tank, the other is depositing tank.

(9)Carbon black discharging system:

The carbon black is coming out automatic; there also has a screw conveyor for removing the carbon black.

Brief description of the process

Firstly, put the raw material into furnace,then seal the feed inlet system. Secondly, burn the fuel material (coal,or wood,or natural gas, oil ) in the combustion system, the reactor will slowly heat ,when the temperature reaches around 250 degree Celsius,it will produce oil gas, oil gas will be processed by our technology ,then goes to the cooling system to cold liquid oil.the gas which can not be liquid under normal pressure ,which will be designed to back to combustion system to

insteadthe fuel material to burn the reactor, which can save energy very much . After

finishing oil produce ,the temperature of reactor will be down, at the same time ,carbon black will be discharged automatically.Lastly,when the temperature falls to 100 degree Celsius,worker could open the door of reactor to discharge of steel wire. Then can start another batch working.