Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mining Feeder

chinese feeder, Steady Vibration, reliable operation, long life, Motor is excitation source, low noise, low power consumption - details see: https://www.machineto.com/2012-new-chinese-feeder-trough-type-feeder-10316314

chinese feeder

Trough Feederis widely used in ore dressing ,coal,chemical industry ,etc.It will block the material from the storage silo sent by the device .

Trough Feedercan be set up on the ground ,or hoisting ore in the warehouse unloading on the mouth .Slot floor for movement back and forth ,the red for the second 20-60 times/min,stroke for the 20-200mm. Drive-stroke may be eccentric appropriate adjustments for the eccentricity of a half-stroke ,According to some of the concentrator production practice ,the sticky ore,eccentricity should not be less than 30mm.Trough of the feeder precursors trough is expected to be about the width of the maximum size of 2-2.5 times ,Trough of the largest feeder to meet the particle size is less than 500mm of iron ore to the mine .The selection of the most common specificaions are 980x1240 trough feeder ,the feeder size for the 350-0mm ,for a 400x600 E-crusher feeding equipment .

The Specifications of Trough Feeder :

Model	Max Feeding Size (mm)	Round Trips/min	Feeding Capacity (m3/h)	Motor		Overall Dimensions L×W×H (mm)	Weight (t)
				Model	Power (kw)
300×300	200	48.47	5-19	Y90L-4	1.5	2320×600×600	0.592
400×400	200	48.47	10-30	Y100L1-6	2.2	2350×725×625	0.64
600×500	200	38.9	15-50	Y112M-4	4	2750×910×855	1.054
700×500	200	38.9	20-60	Y112M-4	4	2780×1010×860	1.100
980×1240	200	23.7	36-90	Y132MS-4	5.5	2845×1180×1280	1.676