10W 30W 60W RF RF LASER TUBE for CO2 laser marking machine

10W 30W 60W RF LASER TUBE for CO2 laser marking machine

Laser tube is the most important part of laser machine, its quality determined laser machine quality, long time lifespan, high quality laser beam, stable performance and maintenance. This is what a good laser machine needed.

With Perfect Laser Co., Ltd’s long time laser experience we are proud to introduce our PE series laser tube to you. We believe you will find what you needed laser tubes:

Usage forRF LASER TUBE

1) Make sure the electrode line is well connected, don’t make mistake with (+,-) electrode.

2) Connect the water cooling tube well; Connect with the regular of down-in and up-out, which input water from cathode and output water from the anode with no leak. Make sure the water is full in the storage, and there is no air bubble in the water-cooling tube before using (check each time before using).

3) Its better to fit self-checking equipment in water-cooling circulation system to avoid any trouble by the more heat which caused by lack of water. For details please consult the supplier of the co2 laser tube.

Maintenance for RF LASER TUBE

1) Please check the water circulation and make sure there is no bubble before using.

2) Check the output reflect lens of cathode to make sure there is no dust or grease spot, if there is dust or grease spot, scrub away them with another cotton or it would do effect to the power and the facular. And it would affect the life-span of the co2 laser tube.

Lifespan for RF laser tube: 10,000-20,000 hours