Home  >  Farm Machinery  >  Farm Machinery  >  Silos

1.Capacity range satisfy most of client, 2.Simple, easy and efficient to install, 3.5000T/10000T Steel Silo for rice storing - details see: https://www.machineto.com/1000t-2000t-5000t-10000t-steel-silo-used-for-storing-rice-10191955

Specification:

Diameter: 31.168m

Layer :19

Capacity: 10993t

Volume: 14657m3

Coating: Galvanized 275g/m2

Total Height:23.74m

Usage: 50T/100T/200T/500T/1000T/2000T/5000T/10000T Steel Silo Used for Storing Rice

Grain Storage Steel Silo With Flat Bottom:

Taian Shelley Engineering Co., Ltdis a professinal manufacturer in producing grain storage silo. Our silos are made of hot sip galvanized steel sheets with 275g/m2 galvanized coating. All silos are of high efficiency and good quality. The life span could reach 20 to 50 years.

Flat bottomed steel silos are with large diameter and capacity, which is popular for its easy installation and lower costs.

There are many ways for unloading, such as the free-fluidized unloading, multi-spot unloading, the flat bottom sweeping unloading and clean by hands etc... We can also choose the concrete conical bottom to put the automatic-flow unloading into practice.

The flat-bottom steel silos can be widely used in grain process and storage lines, some of them can be chosen to be used in oil, feed, flour, starch, brew, and port or grain storage industrial lines.

Structural Outline:

Usage: storing grain, at the same time, other function: Cleaning, Drying, temperature/moistrue monitoring, loading, discharging.

1. The Silo Body

Includes the wall plate, column, manhole, roof ladders and so on.

(1) The wall plate

Our steel is hot galvanized, which makes it durable and weather resistant. Our advanced bolts with spherical washer and the resisting-worn rubber are used to ensure the tightness and using period.

(2) Column

The column, made by the Z-bar, is used to reinforce the silo body. It is connected by junction panels.

(3) Manhole and Roof Ladders

There are inspection door and ladders inside and outside the silo body. It is convenient and accessible for any maintenance work.

2. Roof

Roof is made up of radiated beam, roof cover board, tension ring, ventilator scoop, roof cap, etc.

Specification of all products made by TSE:

Silo type	Hopper bottom silo		Flat bottom silo
Bottom Cone Degree	45 degree	60 degree
Diameter	1.8m-11m	1.8m-7.334m	3.6m-20.1m
Capacity	5.4t-1428t	5.8t-755t	30t-10682t
Volume	7.2m3-1855m3	8.4m3-701m3	39m3-13873m3
Accessory Equipments:
- Bucket Elevator with capacity from 1 tone/hour to 400 tone/hour - Chain Conveyor with capacity from 1 tone/hour to 400 tone/hour - Screw Conveyor with capacity from 1 tone/hour to 200 tone/hour - Elevator Towers - Electrical and Manuel controlled Slide gates - Distributors with 1 in 2/3/4/5/6 out - Catwalks - Spout Pipes
Machines:
- Drying Machines ( Tower Type and Horizontal Type ) with capacity from 5 tone/hour to 50 tone/hour - Mill Machines with capacity from 5 tone/hour to 50 tone/hour - Pellet Machines with capacity from 5 tone/hour to 50 tone/hour --Level sensors, aeration system with centrifugal fan, temperature control system and sweep auger, dedusting system as an option.

Deatails :

Silo Body:Made of high quality galvanized steel corrugated sheet, connected by standard components.

Drag Conveyor: Horizontal transporting for grain

This is conveyor on silo roof as the picture shows.

Bucket Elevator: Vertical transporting for grain

Cleaning Sytem: Precleaner, Cyclone. Pulse Deduster, Air Separator, etc.

Advantages:

1. Lower basic cost with lightweight, low request for foundation, low consumption of steel.

2. High degree of standardization. We can produce the standard components which can be installed on-the-spot.

3. Simple, easy and efficient to install within a short amount of time due to superior component design which are connected by standard bolts.

4. Easy to understand . The bolted silo is equipped with relevant accessories, such as: conveyor, ventilation, drying and monitoring devices, etc. to ensure the quality and safety of the material stored in the silo.

5. Easy to maintain. As the parts of the silo are connected by standard bolts, so it is easy to remove or repair it.

6. Low cost and long tenure of use. The cost of bolted silo is just 35%-50% of the cement silo with the same specification; and its life span can reach 30 years.

Commendatory Letter From Our Clients: