Home  >  Farm Machinery  >  Farm Machinery  >  Silos

1. assembly bolted, easy to install, 2. hot dip galvanized steel silo, 3. easy to maintain, 4. long life span 20-50years - details see: https://www.machineto.com/1000-hopper-bottom-silo-for-grain-storing-10191769

Installation of Insulation Silo

Features of insulation silo

• 1.Thermal insulation
• Grain temperature change gradient inside silos is lower than that outside,thus not likely to have condensation of moisture.
• 2.Safe grain storage
• Storing in a low temperature,increase the grain storage stability,keeps the grain quality and prolongs the safe-storage period
• 3.Low fabrication cost
• With installing an insulation layer(Polyurethane froth,rubber single,glass fiber etc.) on the outer wall,insulation silo can have a low fabrication cost compared to concrete silo.

Specification

Silo type	Hopper bottom silo
Bottom Cone Degree	45 degree	60 degree
Diameter	1.8m-11m	1.8m-7.334m
Capacity	5.4t-1428t	5.8t-755t
Volume	7.2m3-1855m3	8.4m3-701m3
Accessory Equipments:
- Bucket Elevator with capacity from 1 tone/hour to 400 tone/hour - Chain Conveyor with capacity from 1 tone/hour to 400 tone/hour - Screw Conveyor with capacity from 1 tone/hour to 200 tone/hour - Elevator Towers - Electrical and Manuel controlled Slide gates - Distributors with 1 in 2/3/4/5/6 out - Catwalks - Spout Pipes
Machines:
- Drying Machines ( Tower Type and Horizontal Type ) with capacity from 5 tone/hour to 50 tone/hour - Mill Machines with capacity from 5 tone/hour to 50 tone/hour - Pellet Machines with capacity from 5 tone/hour to 50 tone/hour --Level sensors, aeration system with centrifugal fan, temperature control system and sweep auger, dedusting system as an option.

Our service:

1.The silo's diameter ranges from1.8 to 32 meters and the capacities are from 50t to 15000t(Flat bottom silo)15t to 1500t(Hopper bottom silo).

2.Engineer design CAD according to your demand, the final project will be confirmed by common discuss.

3.We can design, manufacture, install and maintain both hopper bottom silo and flat bottom silo.

4.After components be transported to the destination, you can install it by yourself or let us.

5.Engineers and supervision can complete your project in a short time rely on their rich experience and standard component.

Insulation Silo Project in Myanmar, 2010:

This is our previous project of insulation silo in Myanmar, 2010.
This project is about rice storage with 10 sets 1000t insulation hopper bottom steel silo,

The insulation coating is 100 percent, including the silo roof, silo body and hopper bottom.

It could prolong the life of grain and keeps grain in a good quality since the changes of ambient temperature will not influence the temperature inside silos.

Insulations are widely used in tropical area.

Customer from all over the world

Commendatory Letter From Our Clients: