Home  >  Industrial Supplies  >  Industrial Filtration Equipment  >  Dust Collector

The feature of dust collector:, 1.Full automation;, 2.High-efficiency;, 3.Easy maintenance. - details see: https://www.machineto.com/100-new-dust-collecting-equipment-industrial-dust-collector-10225398

DMC pulse bag dust collector

The introduction of dust collector:

DMC dust collector makes the compressed air as driving force for cleaning air, uses pulse injection organization releases the compressed air instantly and induces the severalfold secondary air into the filter bag at high speed to make the bags expand rapidly so as to impact,shake and reverse flow to clean the dust.

The products are a series of products with the filter bag for a set number 12, mainly in 24 bags, 36 bags, 48 bags, 60 bags, 72 bags, 84 bags, 96 bags, 112 bags, 120 bags.

The features of dust collector:

• High Purification efficiency, ability to handle large gas
• Stable performance,long service life
• Convenient operation and maintenance
• Suitable for dust removing of a variety of multiple points of dust producing

Structure of dust collector:

Dust catcher is made of five parts: the upper, middle, lower box, ash systems, and blowing system, blowing system include control instrument, solenoid valve, blowpipe, and gas bge .Box include inlet and outlet box, perforated plate, filter material, dragon skeleton and Venturi tube . Details please refer to the operating instruction manual.

Operating principle of dust collector:

Dusty gas from the air inlet of dust collector into the middle and lower box, through the bag filter's effect, separate the dust from gas, dust was adsorbed on the surface of dust bag, clean air is discharged to the outlet through filter bags, dust attached to the surface of the filter bag grows thicker as time goes by.

According to the setting of injection procedure, pulse injection valve receives the order issued by the controller, trigger to open in order, the compressed air in the gas bag spray out from each hole of injection tube and jet into each corresponding filter bag via venturi, the dust attached to the surface of filter bags fall off into the ash hopper and expel from ash valve.

Applicable of dust collector:

It is widely applicable to cement, electronics, chemicals, food processing, metallurgy, casting, carbon materials, machining, Timber and building materials etc. industries.

DMC series dust collector technical parameter :

Model	DMC-32	DMC-48	DMC-64	DMC-80	DMC-96	DMC-112
Air Volume	1500-2000	2100-3200	2900-4300	4000-6000	5200-7000	6000-9000
Filter Area	24	36	48	60	72	84
Qty Filter Bag(pc)	32	48	64	80	96	112
Material Filter Bag	Choosed by dust component
Spec. Filter Bag (D*Lmm)	Φ120*2000
Qty Pulse Valve	4	6	8	10	12	14
Spec. Pulse Valve	1''-1 1/2''
Fliter Rate(m/min)	1.2-2 (Ajustable)
Negative Pressure (Pa)	≤5000
Resistance(Pa)	≤1200
Concentration Inlet (Nm3/min)	<200
Blow Pressure (Mpa)	0.3-0.5
Compressed Air Consumption (Nm3/min)	0.10	0.14	0.20	0.24	0.29	0.34
Motor Power	1.5	3.0	3.0	5.5	5.5	7.5
Weight(kg) (A and B)	1350	1620	1850	2360	2800	3200
	1220	1470	1670	2150	2540	2880

Product show :

Certificate and honour:

Contact information:

Bella Liu

Henan Hongji Mine Machinery Co.,Ltd

Mob:+86-13937153782

Tel:+86-371-67668558

Fax:+86-371-67662768

Skype:bella_hongji

Looking forward to hearing from you and welcome to visit our factory!