0.4kw 0.5hp 50hz / 60hz to 600hz AC frequency inverter for water pump
1.Brand:CHINSC, 2.0.4kw AC frequency inverter, 3.Three phase 380v, 4.High quality and best service, 5.Short delivery time - details see: https://www.machineto.com/0-4kw-0-5hp-50hz-60hz-to-600hz-ac-frequency-inverter-for-water-pump-10233766
Place of Origin:Shandong China (Mainland) | Brand Name:CHINSC | Model Number:SVF-EV-G0.4T4B-X | Motor Type:AC Motor |
Output power:0.4kw | Communication port:RS485 | Type:3 phase AC frequency inverter | Size:105*178*200mm |
Weight:2.2kg | Input voltage:380V±15% | Output voltage:380V±15% | Output current:3A |
1. AC Frequency Inverter Technical Specification
Item | Description | |
Input Power Supply | Rated voltage | standard:380v Nonstandard: 660v, 1140v, common DC bus ,DC power supply to customize. |
Number of phases and frequency | 3-phase 50/60Hz(refer to rated current specification) | |
Range | Voltage:-15%~20%,frequency:±5%Hz | |
Power Capacity | If Power capacity is more than ten times of the drive capacity, please purchase input reactor components. | |
Output Power Supply | Rated Capacity/Current | Please refer to table2-1 |
Over load ability | Type G: 150% rated current for 1 minute, 180% rated current for 1 second; Type P: 120% rated current for 1 minute, 150% rated current for 1 second. | |
Cooling | Cooling | Forced Cooling |
Temperature | 80°C trip | |
Fan control | Heatsink temperature> 50°C continuous operation | |
Main control functions | control mode | No sense of vector control, V/F control, Torque Control |
Output frequency range | 0.1-600 Hz | |
Frequency resolution | Keypad setting:0.01Hz; Analog setting: 0.1Hz | |
Frequency Accuracy | Keypad setting: highest output frequency ±0.01%; Analog setting: max output frequency ±0.2% | |
Frequency | 0.5-600Hz | |
Braking | 15KW and below, with a brake unit, 18.5KW above need to connect an external braking unit. | |
DC injection braking | Brake Voltage: 0~150% rated current adjustable, allowing the 0Hz~maxmin frequency braking, time :1~50seconds adjustable. | |
Acc/Dec time | 0.1~3600.0s | |
Low-frequency torque compensation | Manuel or automatic compensation | |
Distance | If the wiring distance is more than 50m between the drive and the motor wiring, please install output reactor components | |
Motor overheating detection | Trips and shows E016 | |
Standard functions | Speed tracking, paused reducer, PID control, automatic speed compensation, automatically adjusts voltage output (AVR), 16 segment speed operation, torque control, frequency hopping, torque limiting, automatic multi-stage operation, U(-)SPwn control, pendulum frequency operation, two signals superimposed control, automatic reset, timer. | |
Standard control signals | Analog input | Two groups of external analog inputs: 0~5V, 0 or 4~20mA. Two groups of analog inputs 0~1A. Keypad potentiometer input (0~5V). |
Analog output | Two programmable analog output (0~10V) or (0~20mA) | |
Digital input | Six groups of programmable open collector inputs | |
Digital output | One programmable open collector output, Two set of programmable relay outputs. | |
Communication Interface | Sequence communication | Sequence communication Options included, can be unified through multiple (up to 99 units) dynamic control. |
Communication protocol | Standard MODBUS | |
Communication port | RS485 | |
Display | Seven-Segment Display | Output current, output power, input power, power factor, the timer time, the heat sink temperature. |
Threshold of overload cumulative, the output power limit, the output frequency, speed conversion, DC bus voltage, output voltage and temperature. | ||
Protection | Standard function | Over current, overload, short circuit protection, over voltage, Under voltage protection; Over heat protection; ground fault, input failure phase, output failure phase, the motor overheated. |
Environment | Ambient temperature | -10°C~+40°C(ambient temperature is within 40°C~50°C, deration is required),free from direct sunlight. |
Humidity | Less than 95%RH, without condensation | |
Application environment | Non-corrosive, flammable, explosive, dust absorbent material, all kinds of lint does not accumulate. | |
Vibration | Less than0.6G | |
Elevation | Lower than 1000m,if exceed this value, deration is required. | |
Storage temperature | -20~60°C |
2. Factory Overview
3. Our service
1). Reply your equiry in 24 hour.
2). Customized design is avialable, OEM is welcomed.
3) Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs.
Packaging Detail:carton/wooden case with pallet, as your requests |
Delivery Detail:7days, according to your needs |